﻿<?xml version="1.0" encoding="utf-8"?>
<ManageTool>
  <ToolTips>
    <!-- GTBSI -->
    <ToolTip Command="GTBSI" ControlID="APN" Caption="APN" Text="Access Point Name"/>
    <ToolTip Command="GTBSI" ControlID="APNUsername" Caption="User name" Text="User name"/>
    <ToolTip Command="GTBSI" ControlID="APNPassword" Caption="Password" Text="Password"/>
    <!-- GTSRI -->
    <ToolTip Command="GTSRI" ControlID="ReportMode" Caption="Report Mode" Text="This defines the transmission mode between the backend server and unit."/>
    <ToolTip Command="GTSRI" ControlID="BufferEnable" Caption="Buffer Enable" Text="When enabled, the report messages will be stored to unit memory if no GSM/GPRS network covering."/>
    <ToolTip Command="GTSRI" ControlID="MainServerIP" Caption="Main Server IP" Text="The IP address or the domain name of the main backend server."/>
    <ToolTip Command="GTSRI" ControlID="MainServerPort" Caption="Main Server Port" Text="The port of the main backend server."/>
    <ToolTip Command="GTSRI" ControlID="BackupServerIP" Caption="Backup Server IP" Text="The IP address of the backup backend server."/>
    <ToolTip Command="GTSRI" ControlID="BackupServerPort" Caption="Backup Server Port" Text="The port of the backup backend server."/>
    <ToolTip Command="GTSRI" ControlID="SMSGateway" Caption="SMS Gateway" Text="The number of the SMS gateway used for unit sending SMS to or receiving SMS from. National code starting with‘+’is supported."/>
    <ToolTip Command="GTSRI" ControlID="HeartbeatInterval" Caption="Heartbeat Interval" Text="The interval of sending heartbeat package message which makes GPRS connection alive."/>
    <ToolTip Command="GTSRI" ControlID="SACKEnable" Caption="SACK Enable" Text="This defines whether the backend server should respond to unit with SACK message when receiving messages from the terminal."/>
    <ToolTip Command="GTSRI" ControlID="SMSACKEnable" Caption="SMS ACK Enable" Text="This defines whether the ACK confirmation should respond by SMS when the command was sent by SMS."/>
    <ToolTip Command="GTSRI" ControlID="QuickLinkEnable" Caption="Quick link Enable" Text="This defines whether the device should establish TCP connection under certain condition."/>

    <!-- GTQSS -->
    <ToolTip Command="GTQSS" ControlID="APN" Caption="APN" Text="Access Point Name"/>
    <ToolTip Command="GTQSS" ControlID="APNUserName" Caption="APN User Name" Text="Username"/>
    <ToolTip Command="GTQSS" ControlID="APNPassword" Caption="APN Password" Text="Password"/>
    <ToolTip Command="GTQSS" ControlID="ReportMode" Caption="Report Mode" Text="This defines the transmission mode between the backend server and unit."/>
    <ToolTip Command="GTQSS" ControlID="BufferEnable" Caption="Buffer Enable" Text="When enabled, the report messages will be stored to unit memory if no GSM/GPRS network covering."/>
    <ToolTip Command="GTQSS" ControlID="MainServerIP" Caption="Main Server IP" Text="The IP address or the domain name of the main backend server."/>
    <ToolTip Command="GTQSS" ControlID="MainServerPort" Caption="Main Server Port" Text="The port of the main backend server."/>
    <ToolTip Command="GTQSS" ControlID="BackupServerIP" Caption="Backup Server IP" Text="The IP address of the backup backend server."/>
    <ToolTip Command="GTQSS" ControlID="BackupServerPort" Caption="Backup Server Port" Text="The port of the backup backend server."/>
    <ToolTip Command="GTQSS" ControlID="SMSGateway" Caption="SMS Gateway" Text="The number of the SMS gateway used for unit sending SMS to or receiving SMS from. National code starting with ‘+’is supported."/>
    <ToolTip Command="GTQSS" ControlID="HeartbeatInterval" Caption="Heartbeat Interval" Text="The interval of sending heartbeat package message which makes GPRS connection alive."/>
    <ToolTip Command="GTQSS" ControlID="SACKEnable" Caption="SACK Enable" Text="This defines whether the backend server should respond to unit with SACK message when receiving messages from the terminal."/>
    <!-- GTCFG -->
    <ToolTip Command="GTCFG" ControlID="NewPassword" Caption="New Password" Text="Set to replace the old password."/>
    <ToolTip Command="GTCFG" ControlID="DeviceName" Caption="Device Name" Text="An ASCII string to represent the name of unit."/>
    <ToolTip Command="GTCFG" ControlID="ODOEnable" Caption="ODO Enable" Text="Enable/disable to calculate the total mileage."/>
    <ToolTip Command="GTCFG" ControlID="ODOInitialMileage" Caption="ODO Initial Mileage" Text="The initial value for calculating the total mileage."/>
    <ToolTip Command="GTCFG" ControlID="GPSOnNeed" Caption="GPS On Need" Text="Whether to close GPS chip after retrieving GPS position information."/>
    <ToolTip Command="GTCFG" ControlID="GPSFixDelay" Caption="GPS Fix Delay" Text="The time to wait after GPS fixing succeed."/>
    <ToolTip Command="GTCFG" ControlID="ReportItemsMask" Caption="Report Items Mask" Text="Bitwise report mask to configure the composition of all the uplink message."/>
    <ToolTip Command="GTCFG" ControlID="GSMReport" Caption="GSM Report" Text="Information of the service cell and the neighbour cells when GPS fix fail."/>
    <ToolTip Command="GTCFG" ControlID="EventMask" Caption="Event Mask" Text="Bitwise mask to configure which event message should be sent to the backend server."/>
    <ToolTip Command="GTCFG" ControlID="EPBMode" Caption="EPB Mode" Text="The mode of External Power Control Unit With Built-in Motion Sensor."/>
    <ToolTip Command="GTCFG" ControlID="LEDOn" Caption="LED On" Text="Configure the working mode of power LED and GPS LED."/>
    <ToolTip Command="GTCFG" ControlID="InfoReportEnable" Caption="Info Report Enable" Text="Enable/disable unit information report function."/>
    <ToolTip Command="GTCFG" ControlID="InfoReportInterval" Caption="Info Report Interval" Text="Reporting interval for sending unit information."/>
    <ToolTip Command="GTCFG" ControlID="LocationByCall" Caption="Location By Call" Text="Configure how to handle an incoming call."/>
    <ToolTip Command="GTCFG" ControlID="ExpiryEnable" Caption="Expiry Enable" Text="Enable/disable the expiry function to stop all the GPS fixing and any reports."/>
    <ToolTip Command="GTCFG" ControlID="ExpiryTime" Caption="Expiry Time" Text="The time when to stop all the GPS fixing and any reports."/>
    <ToolTip Command="GTCFG" ControlID="CheckAllReportMask" Caption="Check All" Text="Pick out all pickings."/>
    <ToolTip Command="GTCFG" ControlID="CheckAllEventMask" Caption="Check All" Text="Pick out all pickings."/>
    <ToolTip Command="GTCFG" ControlID="AgpsMode" Caption="Agps Mode" Text="A numeric to indicate whether to enable AGPS"/>
    <ToolTip Command="GTCFG" ControlID="SleepEnable" Caption="Sleep enable" Text="Enable or disable the sleep mode when charging"/>

    <!-- GTPIN -->
    <ToolTip Command="GTPIN" ControlID="EnableAutoUnlockPIN" Caption="Enable Auto-Unlock PIN" Text="Enable/Disable the auto-unlock PIN function."/>
    <ToolTip Command="GTPIN" ControlID="PIN" Caption="PIN" Text="Code used to unlock the SIM PIN"/>
    <ToolTip Command="GTPIN" ControlID="PINChecking" Caption="PIN Checking" Text="A numeric to indicate whether to lock the device with SIM-PIN."/>
    <!-- GTDOG -->
    <ToolTip Command="GTDOG" ControlID="Mode" Caption="Mode" Text="Working mode"/>
    <ToolTip Command="GTDOG" ControlID="IgnitionFrequency" Caption="Ignition Frequency" Text="If the time interval between two adjacent ignition on events is greater than this value, \n unit will automatically reboot when ignition on."/>
    <ToolTip Command="GTDOG" ControlID="Interval" Caption="Interval" Text="The interval to reboot the device in day."/>
    <ToolTip Command="GTDOG" ControlID="Time" Caption="Time" Text="The time clock to perform the reboot operation after 'Interval' is met."/>
    <ToolTip Command="GTDOG" ControlID="ReportBeforeReboot" Caption="Report Before Reboot" Text="Whether to report the +RESP:GTDOG message before reboot."/>
    <ToolTip Command="GTDOG" ControlID="InputID" Caption="Input ID" Text="ID of the digital input port which is used to trigger the manually reboot in despite of working mode."/>
    <ToolTip Command="GTDOG" ControlID="UnitMode" Caption="Unit" Text="The unit mode of the Interval."/>
    <ToolTip Command="GTDOG" ControlID="GsmInterval" Caption="Gsm interval" Text="The interval to reboot the device when in no GSM signal situation."/>
    <ToolTip Command="GTDOG" ControlID="PdpInterval" Caption="Pdp interval" Text="The interval to reboot the device when GPRS unable to register successfully."/>
    <!-- GTTMA -->
    <ToolTip Command="GTTMA" ControlID="Sign" Caption="Sign" Text="Indicate the positive or negative of UTC offset from local time."/>
    <ToolTip Command="GTTMA" ControlID="HourOffset" Caption="Hour Offset" Text="UTC offset in hours."/>
    <ToolTip Command="GTTMA" ControlID="MinuteOffset" Caption="Minute Offset" Text="UTC offset in minutes."/>
    <ToolTip Command="GTTMA" ControlID="DaylightSaving" Caption="Day light Saving" Text="Enable/disable daylight saving time."/>
    <ToolTip Command="GTTMA" ControlID="UTCTime" Caption="UTC Time" Text="UTC time used to adjust local time."/>
    <!-- GTNMD -->
    <ToolTip Command="GTNMD" ControlID="Mode" Caption="Mode" Text="A hex numeric to determine how the function works."/>
    <ToolTip Command="GTNMD" ControlID="NonMovementDuration" Caption="Non Movement Duration" Text="A time parameter to determine whether the device enters non-movement status."/>
    <ToolTip Command="GTNMD" ControlID="MovementDuration" Caption="Movement Duration" Text="A time parameter to determine whether the device enters movement status."/>
    <ToolTip Command="GTNMD" ControlID="MovementThreshold" Caption="Movement Threshold" Text="The threshold for the motion sensor to determine whether the device is in movement."/>
    <ToolTip Command="GTNMD" ControlID="RestFixInterval" Caption="Rest Fix Interval" Text="the fix interval for the report of FRI when the device is in rest state if Bit3 of (mode) is 1."/>
    <ToolTip Command="GTNMD" ControlID="RestSendInterval" Caption="Rest Send Interval" Text="the send interval for the report of FRI when the device is in rest state if Bit3 of (mode) is 1."/>
    <ToolTip Command="GTNMD" ControlID="PmRestThreshold" Caption="Pm Rest Threshold" Text="The threshold for the EBK motion sensor to determine whether the EBK enters non-movement status."/>
    <ToolTip Command="GTNMD" ControlID="PmMotionThreshold" Caption="Pm Motion Threshold" Text="The threshold for the EBK motion sensor to determine whether the EBK enters movement status."/>
    <ToolTip Command="GTNMD" ControlID="UrcReport" Caption="Urc Report" Text="Enable or disable output sensor state through urc."/>
    <ToolTip Command="GTNMD" ControlID="EnterMovementByCommand" Caption="Enter Movement By Command" Text="A numeric to indicate whether to force entering movement state after receiving GTRTO command with subcommand RTL or getting GTLSW state update from EBK."/>
    <!--GTFKS-->
    <ToolTip Command="GTFKS" ControlID="PowerKeyEnable" Caption="Power Key Mode" Text="A numeric to indicate the working mode of the power key."/>
    <ToolTip Command="GTFKS" ControlID="FullPowerUp" Caption="Full Power Up" Text="A numeric to indicate whether the terminal powers on completely after the terminal was power on because of charger inserted."/>
    <ToolTip Command="GTFKS" ControlID="FunctionKeyMode" Caption="Function Key Mode" Text="The working mode for the function key operation."/>
    <ToolTip Command="GTFKS" ControlID="PowerKeyInd" Caption="Power Key Ind" Text="A numeric to indicate the working mode of the motor for power key."/>
    <ToolTip Command="GTFKS" ControlID="FunctionKeyInd" Caption="Function Key Ind" Text="A numeric to indicate the working mode of the motor for function key."/>
    <ToolTip Command="GTFKS" ControlID="SOSReportMode" Caption="SOS Report Mode" Text="A numeric to indicate the way of reporing GPS location for SOS event."/>
    <!-- GTFRI -->
    <ToolTip Command="GTFRI" ControlID="Mode" Caption="Mode" Text="The working mode of fixed report."/>
    <ToolTip Command="GTFRI" ControlID="CheckInterval1" Caption="Check Interval" Text="The interval time to fix GPS when vehicle is ignition off."/>
    <ToolTip Command="GTFRI" ControlID="SendInterval1" Caption="Send Interval" Text="Timed cycle to send report to the backend server."/>
    <ToolTip Command="GTFRI" ControlID="CheckInterval2" Caption="Ignition Check Interval" Text="The interval time to fix GPS when the device attached vehicle is ignition on."/>
    <ToolTip Command="GTFRI" ControlID="SendInterval2" Caption="Ignition Send Interval" Text="The period to send the position information when the device attached vehicle is ignition on."/>
    <ToolTip Command="GTFRI" ControlID="StartTime" Caption="Start Time" Text="The start time of the schedule fixed report."/>
    <ToolTip Command="GTFRI" ControlID="EndTime" Caption="End Time" Text="The end time of the schedule fixed report."/>
    <ToolTip Command="GTFRI" ControlID="Distance" Caption="Distance" Text="The specified distance to send the position information when (Mode) is 2."/>
    <ToolTip Command="GTFRI" ControlID="Mileage" Caption="Mileage" Text="The specified path length to send the position information when (Mode) is 3."/>
    <ToolTip Command="GTFRI" ControlID="MovementDetectMode" Caption="Movement Detect Mode" Text="Enable or disable the movement detect function."/>
    <ToolTip Command="GTFRI" ControlID="MovementSpeed" Caption="Movement Speed" Text="The speed threshold of movement detect."/>
    <ToolTip Command="GTFRI" ControlID="MovementDistance" Caption="Movement Distance" Text="The distance threshold of movement detect."/>
    <ToolTip Command="GTFRI" ControlID="MovementSendNumber" Caption="Movement Send Number" Text="The number of reports which the terminal will send out before it moves again."/>
    <ToolTip Command="GTFRI" ControlID="ReportMask" Caption="Report Mask" Text="Bitwise mask to configure the composition of the fixed report message."/>
    <ToolTip Command="GTFRI" ControlID="DiscardNoFix" Caption="Discard No Fix" Text="Disable/enable reporting when there is no GPS fixing."/>
    <ToolTip Command="GTFRI" ControlID="CheckAllReportMask" Caption="Report Mask" Text="Pick out all of Report Mask."/>
    <ToolTip Command="GTFRI" ControlID="Corner" Caption="Corner" Text="A numeric to indicate whether to report +RESP:GTFRI message according to the heading changing."/>
    <ToolTip Command="GTFRI" ControlID="AppendMask" Caption="Append Mask" Text="Bitwise report mask to configure the appended composition in the message +RESP:GTFRI."/>
    <!-- GTGEO -->
    <ToolTip Command="GTGEO" ControlID="GEOID" Caption="GEO ID" Text="ID of the Geo-Fence."/>
    <ToolTip Command="GTGEO" ControlID="Mode" Caption="Mode" Text="The working mode of the Geo-Fence alarm."/>
    <ToolTip Command="GTGEO" ControlID="Latitude" Caption="Latitude" Text="The latitude of a point which is defined as the center of the Geo-Fence circular region."/>
    <ToolTip Command="GTGEO" ControlID="Longitude" Caption="Longitude" Text="The longitude of a point which is defined as the center of the Geo-Fence circular region."/>
    <ToolTip Command="GTGEO" ControlID="Radius" Caption="Radius" Text="The radius of the Geo-Fence circular region."/>
    <ToolTip Command="GTGEO" ControlID="CheckInterval" Caption="Check Interval" Text="The interval of GPS checking for the Geo-Fence alarm."/>
    <ToolTip Command="GTGEO" ControlID="StateMode" Caption="State Mode" Text="The State Mode: 0: It should report when get the state first time.1: It doesn’t report until the state changes."/>
    <!-- GTSPD -->
    <ToolTip Command="GTSPD" ControlID="Mode" Caption="Mode" Text="The working mode of the speed alarm."/>
    <ToolTip Command="GTSPD" ControlID="MinSpeed" Caption="Min Speed" Text="Minimum speed limit."/>
    <ToolTip Command="GTSPD" ControlID="MaxSpeed" Caption="Max Speed" Text="Maximum speed limit."/>
    <ToolTip Command="GTSPD" ControlID="Duration" Caption="Duration" Text="A period of time that the speed meets and maintains in the alarm condition."/>
    <ToolTip Command="GTSPD" ControlID="SendInterval" Caption="Send Interval" Text="The interval of sending speed alarm message if unit maintains in the alarm condition."/>
    <!-- GTOUT -->
    <ToolTip Command="GTOUT" ControlID="Enable_Output1" Caption="Enable Output1" Text="Set the final status of the output port 1 when the waveform remains high or low."/>
    <ToolTip Command="GTOUT" ControlID="Duration_Output1" Caption="Duration Output1" Text="Set half-cycle time of square-wave."/>
    <ToolTip Command="GTOUT" ControlID="ToggleTimes_Output1" Caption="Toggle Times Output1" Text="The number of square-wave generated from output port1."/>
    <!-- GTDIS -->
    <ToolTip Command="GTDIS" ControlID="Mode" Caption="Mode" Text="A numeric to check whether to enable the digital input"/>
    <ToolTip Command="GTDIS" ControlID="DebounceTime_1" Caption="Debounce Time 1" Text="The time for debouncing."/>
    <!-- GTRTO -->
    <ToolTip Command="GTRTO" ControlID="SubCommand" Caption="Sub Command" Text="It is used to retrieve information from unit or control the terminal to execute certain actions."/>
    <ToolTip Command="GTRTO" ControlID="SingleConfigurationCommand" Caption="Single Configuration Command" Text="Get the specified command configuration of the terminal via message +RESP:GTALS."/>
    <ToolTip Command="GTRTO" ControlID="OutputDirection" Caption="Output Direction" Text="A numeric to indicate the output way of sub command to executing. "/>
    <!-- GTDAT -->
    <ToolTip Command="GTDAT" ControlID="CommandType" Caption="Command Type" Text="Command type to indicate the direction to transferring data."/>
    <ToolTip Command="GTDAT" ControlID="Data" Caption="Data" Text="Data to be transferred between the backend server and the equipment connected to the serial port of unit."/>
    <ToolTip Command="GTDAT" ControlID="NeedACK" Caption="Need ACK" Text="A numeric to indicate whether the device should reply +ACK message to the backend server.."/>
    <!--GTWLT-->
    <ToolTip Command="GTWLT" ControlID="CallFilter" Caption="Call Filter" Text="A numeric to indicate whether to filter the incoming call."/>
    <ToolTip Command="GTWLT" ControlID="MobileStart" Caption="Mobile Start" Text="A numeric to indicate the first index of the white call number to input."/>
    <ToolTip Command="GTWLT" ControlID="MobileEnd" Caption="Mobile End" Text="A numeric to indicate the last index of the white call number to input."/>

    <!--GTGLM-->
    <ToolTip Command="GTGLM" ControlID="GoogleMode" Caption="Google Mode" Text="A numeric to indicate whether to send a SMS with google link."/>
    <ToolTip Command="GTGLM" ControlID="MobileStart" Caption="Mobile Start" Text="A numeric to indicate the first index of the direct number to input."/>
    <ToolTip Command="GTGLM" ControlID="MobileEnd" Caption="Mobile End" Text="A numeric to indicate the last index of the direct number to input."/>
    
    <!--GTSFM--><!--
    <ToolTip Command="GTSFM" ControlID="OnOffEnable" Caption="OnOff Enable" Text="Enable or disable “SFM” based functionality."/>
    <ToolTip Command="GTSFM" ControlID="OffTime" Caption="Off Time" Text="When “SFM” is enabled and GPS fix can not be aquired for “OffTime” minutes, \n GSM communication module will be disabled."/>
    <ToolTip Command="GTSFM" ControlID="OnTime" Caption="OnTime" Text="If GPS signal is back and available for “OnTime”minutes \n the GSM communication module can be activated again  "/>
    <ToolTip Command="GTSFM" ControlID="SFAlt" Caption="SFAlt" Text="If GPS signal is available for “onTime” minutes and unit’s altitude is LOWER than “SFAlt”, \n GSM communication module can be activated."/>
    <ToolTip Command="GTSFM" ControlID="SFSpeed" Caption="SF Speed" Text="If GPS signal is available for “onTime” minutes and unit’s speed is LOWER than“SFSpeed”, \n then GSM communication module can be activated"/>-->
    
    <!--GTNTS-->
    <ToolTip Command="GTNTS" ControlID="Enable" Caption="Enable" Text="Enable or disable “NTS” based functionality"/>
    <ToolTip Command="GTNTS" ControlID="RssiThrehold" Caption="Rssi threhold " Text="The threshold of the CSQ value."/>
    <ToolTip Command="GTNTS" ControlID="Interval" Caption="Interval" Text="The interval time to change to another opetor"/>
    <ToolTip Command="GTNTS" ControlID="Oper1" Caption="Oper1" Text="The first network it will select when under threshold over interval time."/>
    <ToolTip Command="GTNTS" ControlID="Oper2" Caption="Oper2" Text="The second network it will select when under threshold over interval time."/>
    <ToolTip Command="GTNTS" ControlID="Oper3" Caption="Oper3" Text="The third network it will select when under threshold over interval time."/>
    <ToolTip Command="GTNTS" ControlID="GSMinterval" Caption="GSM interval" Text="The time in minute before changing the operator without GSM network."/>
   
    <!--GTCMD-->
    <ToolTip Command="GTCMD" ControlID="Mode" Caption="Mode" Text="The working mode of the Store Command String"/>
    <ToolTip Command="GTCMD" ControlID="StoreCmdId" Caption="Store cmd id" Text="A numeric to identify the store command"/>
    <ToolTip Command="GTCMD" ControlID="CommandString" Caption="Command string" Text="AT command String"/>

    <!--GTUDF-->
    <ToolTip Command="GTUDF" ControlID="Mode" Caption="Mode" Text="The working mode of the User Defined Function"/>
    <ToolTip Command="GTUDF" ControlID="GroupId" Caption="Group id" Text="A numeric to identify the group"/>
    <ToolTip Command="GTUDF" ControlID="DebounceTime" Caption="Debounce time" Text="The time for debouncing input event"/>
    <ToolTip Command="GTUDF" ControlID="StocmdAck" Caption="Stocmd ack" Text="A numeric to indicate whether to return acknowledgement message after the stored commands are executed"/>
    <ToolTip Command="GTUDF" ControlID="InputIdMask" Caption="Input id mask" Text="The mask used to select the input events which should meet the state"/>
    <ToolTip Command="GTUDF" ControlID="StocmdIdMask" Caption="Stocmd id mask" Text="The mask used to select the store commands which will be executed when the state of group changes"/>

    <!--GTUPC-->
    <ToolTip Command="GTUPC" ControlID="Protocol" Caption="Download Protocol" Text="The protocol used to download the file. Only HTTP is supported now. Set to 0"/>
    <ToolTip Command="GTUPC" ControlID="Timeout" Caption="Download Timeout" Text="Specifies the expiration timeout of one single downloading.  If the downloading expires, it is considered to be failure"/>
    <ToolTip Command="GTUPC" ControlID="MaxRetry" Caption="Max Download Retry" Text="Specifies the maximum time of retrying to download the configuration file upon downloading failure"/>
    <ToolTip Command="GTUPC" ControlID="ReportEnable" Caption="Report Enable" Text="A numeric to indicate whether to report the message +RESP:GTUPC to indicate the configuration was updated over the air"/>
    <ToolTip Command="GTUPC" ControlID="Interval" Caption="Update Interval" Text="The time interval in hour for updating the configuration over the air"/>
    <ToolTip Command="GTUPC" ControlID="Url" Caption="Download Url" Text="Specifies the URL to download the configuration file"/>
    <ToolTip Command="GTUPC" ControlID="Mode" Caption="Mode" Text="A numeric to indicate the working mode of downloading configuration over the air."/>
    <!-- GTOWH -->
    <ToolTip Command="GTOWH" ControlID="Mode" Caption="Mode" Text="Working mode"/>
    <ToolTip Command="GTOWH" ControlID="DayOfWork" Caption="Day Of Work" Text="Bitwise mask to specify the working days in a week."/>
    <ToolTip Command="GTOWH" ControlID="WorkingHoursStart1" Caption="Working Hours Start1" Text="The first period of the start working hours in a day."/>
    <ToolTip Command="GTOWH" ControlID="WorkingHoursEnd1" Caption="Working Hours End1" Text="The first period of the end working hours in a day."/>
    <ToolTip Command="GTOWH" ControlID="WorkingHoursStart2" Caption="Working Hours Start2" Text="The second period of the start working hours in a day."/>
    <ToolTip Command="GTOWH" ControlID="WorkingHoursEnd2" Caption="Working Hours End2" Text="The second period of the end working hours in a day."/>
    <ToolTip Command="GTOWH" ControlID="DigitalInputID" Caption="Digital Input ID" Text="ID of the digital input port."/>
    <!-- GTTEM -->
    <ToolTip Command="GTTEM" ControlID="Mode" Caption="Mode" Text="A numeric to indicate the working mode of temprature alarm."/>
    <ToolTip Command="GTTEM" ControlID="Mintemperature" Caption="Min temperature" Text="The lower limit of the temperature range."/>
    <ToolTip Command="GTTEM" ControlID="Maxtemperature" Caption="Max temperature" Text="The upper limit of the temperature range."/>
    <ToolTip Command="GTTEM" ControlID="Duration" Caption="Duration" Text="According to the working mode, if the temperature satisfies the specified temperature range and maintains a period of time defined by Duration, the temperature alarm will be triggered."/>
    <ToolTip Command="GTTEM" ControlID="Sendinterval" Caption="Send interval" Text="After the temperature alarm is triggered, the temperature alarm message is sent."/>

    <!--GTJDC-->
    <ToolTip Command="GTJDC" ControlID="Mode" Caption="Mode" Text="The working mode of the Jamming detection"/>
    <ToolTip Command="GTJDC" ControlID="SignalThreshold" Caption="Signal Threshold" Text="Jamming detection algorithm uses these two parameters to judge whether the device is currently being jammed. The smaller the parameter, the more sensitive."/>
    <ToolTip Command="GTJDC" ControlID="JammingCellNumberThreshold" Caption="Jamming Cell Number Threshold" Text="Jamming detection algorithm uses these two parameters to judge whether the device is currently being jammed. The smaller the parameter, the more sensitive."/>
    <ToolTip Command="GTJDC" ControlID="EnterJammingTimerThreshold" Caption="Enter Jamming Timer Threshold" Text="When the device detects the jamming, the device based on this  parameter to trigger the enter Jamming event. "/>
    <ToolTip Command="GTJDC" ControlID="QuitJammingTimerThreshold" Caption="Quit Jamming Timer Threshold" Text="When the device detects the jamming, the device based on this  parameter to trigger the quit  Jamming event."/>

    <!--GTRVC-->
    <ToolTip Command="GTRVC" ControlID="Mode" Caption="Mode" Text="A numeric to indicate the working mode of driving the motor vibrating."/>
    <ToolTip Command="GTRVC" ControlID="ONDuration" Caption="ON Duration" Text="The Vibration Module is inactive as default."/>
    <ToolTip Command="GTRVC" ControlID="OFFDuration" Caption="OFF Duration" Text="Time period of paused Vibration before next Vibration can happen."/>
    <ToolTip Command="GTRVC" ControlID="Repeats" Caption="Repeats" Text="Both periods, the ON Duration and the OFF Duration together are 1 Repeat, which is the default value."/>
    <ToolTip Command="GTRVC" ControlID="Acknowledgment" Caption="Acknowledgement" Text="This parameter determines if a acknowledgement report is sent back to the remote server or SMS sender of command or not."/>

    <!--GTPDS-->
    <ToolTip Command="GTPDS" ControlID="Mode" Caption="Mode" Text="Working mode"/>
    <ToolTip Command="GTPDS" ControlID="Mask" Caption="Mask" Text="Bitwise mask to configure which device states will be preserved.Each bit represents a state."/>
  
  </ToolTips>
</ManageTool>